forums.ps2dev.org

k1 · Joined: 30 Nov 2006 Posts: 1

The SIXAXIS controller can be used on Windows PC.
As is the case with it under Linux(jimparis's post), it works as USB HID device that needs special initialization under Windows.

The instruction to make it to work properly is as follows:
1. Download and install the filter driver in libusb-win32 (libusb-win32-filter-bin-x.x.x.x.exe).
2. Download ps3sixaxis_en.zip from here.
3. Unpack ps3sixaxis_en.zip.
4. Plug the SIXAXIS into your PC.
5. Run ps3sixaxis_en.exe once.
6. Push the PS button on the SIXAXIS once if it seems to be sleeping.

robk6364 · Joined: 05 Dec 2006 Posts: 2

Thanks for the info... but I can't get it to work? I read somewhere else that this method worked (that's how I found this page), but when I tried it my PS3 SIXAXIS still won't respond on my PC... it's just charging.

Has anyone else tried this? Did it work? What might I be doing wrong?
Any help would be GREATLY appreciated! Thanks!

robk6364 · Joined: 05 Dec 2006 Posts: 2

nevermind I got it... works great! :)
(I just tried running ps3sixaxis_en.exe from command line rather than double-clicking the file in windows and then it worked... maybe it was buried too deep in my drive or something. Anyway, great work k1... thanks!

noon · Joined: 06 Dec 2006 Posts: 1

Hello

I'd like to get the accelerations values (X, Y, Z) of the controller using DXinput.
It seems not to be exposed by the driver. At least I cannot see it in the controller panel.

I'd like to understand what the ps3sixaxis_en.exe is actually doing ?
Is it used to register the buttons and axis to the input controller ?
Could you give some infos about this application ?

Thanks

zaphod · Joined: 21 Jul 2004 Posts: 53

That program send the wake up sequence to activate the sixaxis controller. Like the para para paradise controller before t, it requires a non-standard initialization sequence to turn on the device.

darth_angmar · Joined: 13 Mar 2007 Posts: 1

When I run the program in command line it says found 5 busses. I did everything the way it has said to multiple times, but no luck. None of the buttons work. Any help?
_________________
-Unlimited Power

::RMB:: · Joined: 04 Apr 2007 Posts: 1

Is there a way to use the Sixaxis Controller under Linux?

Sorry
http://forums.ps2dev.org/viewtopic.php?t=7097

number854 · Joined: 27 Oct 2007 Posts: 1

could somebody tell me how to do this i don't know how to use command prompt and when i try to just double click the file a window appears and quickly dissapears.

AcidicRegent0 · Joined: 07 Nov 2007 Posts: 2

i have the same problem where the ps3sixaxis_en.exe appears for a second and then disappears i have no idea what's going on or how to run it on the cmd plz help
_________________
Gi, Yu, Jin, Rei, Makoto, Meiyo, Chugi

AcidicRegent0 · Joined: 07 Nov 2007 Posts: 2

I FOUND THE SOLUTION FINALLY GO TO THIS SITE AND FOLLOW THE INSTRUCTIONS ENJOY :)

http://boardsus.playstation.com/playstation/board/message?board.id=ps3&thread.id=1375302&view=by_date_ascending&page=1
_________________
Gi, Yu, Jin, Rei, Makoto, Meiyo, Chugi

barcajunior · Joined: 15 Jan 2008 Posts: 1

Thanks.The solution did work.

eddd · Joined: 16 Jan 2008 Posts: 11

I wonder if we'll ever get it working wirelessly over bluetooth. It can be done in linux so I don't see why not.

Alcahest · Joined: 25 Mar 2005 Posts: 135

somewhat related question.
I use my PC to charge the SIXAXIS (now DShock3) via USB.
I was wondering if while it's charging we could probe the device to check how much time is left for charging to be complete?

Vincent_M · Joined: 03 Apr 2007 Posts: 73

Is there a 64-bit version of this driver? I've just switched over to Vista, and it was the 64-bit version. I'm kinda stuck with it atm.

ps2asker · Joined: 12 Nov 2007 Posts: 7

I have tried this with both my Dual Shock 3 controllers and its not working. Is it becuase its DS3's or becuase im using 64bit OS?

ralferoo · Joined: 03 Mar 2007 Posts: 122

eddd · Joined: 16 Jan 2008 Posts: 11

I got the sixaxis working over bluetooth on PS3 linux but having a bit of time trying to compile sixpair.c on my desktop. Can anyone compile this OK?

http://www.pabr.org/sixlinux/sixlinux.en.html

ps2asker · Joined: 12 Nov 2007 Posts: 7

laichung · Joined: 06 May 2005 Posts: 123

What do you mean "not working"? It cannot detect the pad or it cannot init after you run the init program? If it cannot detect the pad, it should be nothing you can do.

If your case is, nothing happen after you run the init program, I found a source code of initiating the sixaxis. It should be work fine if you recompile is using libusb-win32 with it's 64-bit driver, do you want to try? If yes, I can share the source code.

Joel · Joined: 23 Feb 2008 Posts: 16

with some help, i got the sixaxis to connect to windows using bluetooth.
HOWEVER this diver is for USB, not bluetooth, so it pretty much does the same thing as it did before this driver was released...(ie; nothing) untill *someone writes one (ahem.. K1)

There is a video of this here http://fr.youtube.com/watch?v=tqQ03uO1NGo
And here http://fr.youtube.com/watch?v=f-lQZzEznIM

The first person who did this is in Belgium and only speaks French. (I cannot understand French). But if you want to see what he wrote about this, it is all here:
http://www.win-web.be/forum/index.php?showtopic=11368

the important parts are translated into English here:

http://forums.vr920.com/Topic1690-2-1.aspx?Update=1

The English here is not so great, so I can help clarify if you want. Most importantly, I’ve figured out on my own, that you don’t need to boot into Linux to change the MAC in the sixaxis, it can be done in windows with GlovePIE. http://carl.kenner.googlepages.com/glovepie

[march 16th edit: the above person said that we needed the widcomm driver at the same time, following the instructions below, you don't need it, bluesoleil alone works just fine)

so without further adu.. here is what to do!

1st, get GlovePIE and give the sixaxis your mac
(see documentation.rtf for how to do that)
don't forget that you might need to press the PS button the first time you run a script that uses the sixaxis

IVT_BlueSoleil_v5.0.5_Build_178.zip (try google)
(i had to add a hack because my MSI starkey isn't supported, but it works fine with the hack)
info on hack here:[url] http://www.wiili.org/forum/bluesoleil-solution-for-not-supported-adapters-t794.html[/url]

plugged in bluetooth adapter and made bluesoleil install it (ignoring windows new hardware window)

**edit, i made these instructions more clear so it works every time**

1)[discover controller] open bluetooth places, and make sure classic window is closed (if its open, this never works, but if closed, always works) press the PS button the sixaxis, then search devices. wait for it to finish
nothing new will show up in bluetooth places, but when you open classic view, you'll see a new HID device with only a mac address

2) [install controller] after pressing the PS button again, right click on the new HID device and click "search services" at first, it may fail, just try again while the lights are flashing on the sixaxis. you'll know its worked when the mac address changes to the name of the device. at this point, it will also show up in bluetooth places. but you are not done yet
3)[initialise connection] with the lights still flashing (press PS again if they stopped) right click on the new controller icon in the classic view and click connect, it should fail right away (immediate), it if takes a while to fail (about 2 seconds), it might be a timeout, so try again (while the lights are still flashing on the controller).. you can do this as many times as you want, but its important to do it once. (it will not connect at this point)

4)[restart bluetooth] right click on the tray icon and turn off your bluetooth, (for me i waited untill the windows made the ejection sound) then turn it back on again, (if you are using a USB dongle like me, you don't actually have to remove it from the computer)
you don't need any bluetooth windows open at this point, once the adapter is back on again, press the PS button on the sixaxis and it will connect right away (tray icon will turn green)
you can also view the properties in bluetooth places and see how strong the signal is, (my bluesoleil was patched, so it may have something to do with not seeing any packets being counted)

once this has been connected once, it will re-connect automatically every time after restarting the bluetooth fresh
(also, i did a little experiement just now, i went into the task manager and killed btstackserver while the bluetooth service was stopped, i then restarted the bluetooth, and pressed the PS button on sixiaxis, and hey, it connected!.. i wonder what would happen if i uninstalled the widcomm stuff all together.. perhaps some other time)

so yeah, we need a driver or something to get this working..
also, if you are interested in accelerometer and gyro data, use glovepie, its great.

Joel · Joined: 23 Feb 2008 Posts: 16

so, i emailed K1, and he is a no-go, he doesn't have a bluetooth adapter. can anyone else tackle this?
has anyone else got this to work?

Arwin · Joined: 12 Jul 2005 Posts: 426

Joel · Joined: 23 Feb 2008 Posts: 16

when you download glovepie, (see link above) there is an included file called documentation.rtf, instructions for adding the sixaxis is there, along with explanation for how to write scripting. (if you know basic programming, its easy)

eddd · Joined: 16 Jan 2008 Posts: 11

89ron · Joined: 09 Mar 2008 Posts: 51

Hi all,

I develop my own "drivers" for windows XP (32bit):

You can download it, there : http://www.megaupload.com/fr/?d=G0A2TZ7R

89ron · Joined: 09 Mar 2008 Posts: 51

Coming soon:

waynevan2000 · Joined: 13 Nov 2007 Posts: 2

Hi 89ron.

When i press the PS button the 4 LED's flash without connecting.

Any chance of spoon feeding a non Dev ? Is my dongle simply incompatible with your driver ?

EDIT: To ron's reply below. Thanks for the incompatibility info. I will order another dongle.

Rob_F · Joined: 10 Mar 2008 Posts: 10

wuerzig · Joined: 11 Mar 2008 Posts: 1

Hi there,

first, thanks 89ron for your effort, your "driver" works just fine!

I also have invested quite some effort in making the damn thing work using bluetooth. I ported the mac-address-changing-tool (ps3-linux-version) to windows, and continued using windows bluetooth api (failed, not even l2cap is possible from user mode) and widcomm sdk (got it to recognize the controller, but failed sending the activation sequence to the controller, because the widcomm sdk simply doesn't support that). I then also pursuied the method using freebt-drivers but lost interest.

I'd be very happy to contribute any of my findings and helping the development of BtSix. I have extensive knowledge in Windows coding in general (including USB, COM and IPC/IOCTL) and C++ (MSVC mostly). I'd like to give the user the possibility to select, for each button, analog or digital mode (ALL buttons of the sixaxis have more then two states!), and mapping of the motion sensors.

89ron · Joined: 09 Mar 2008 Posts: 51