PMP VLC 0.0.9 Player

Discuss the development of new homebrew software, tools and libraries.

Moderators: cheriff, TyRaNiD

Post Reply
someone
Idiot
Posts: 71
Joined: Tue Sep 13, 2005 9:03 pm

Post by someone »

heeeeeeeeeeeeelp

iam using 3.95gen and i managed to make pmpvlc to work using dev4 for oe darkalex and put them in game150 but i cant play vlcenabled.avi psp read it and when loading psp shuts down please any help
overflow74
Posts: 1
Joined: Tue Jul 29, 2008 7:42 am

Post by overflow74 »

Hi,

I've a problem with my settings.
I've picture and sound for about 5 seconds and then the wifi light go off and the PSP have a big bug. I must remove the battery to shut down my PSP.

I use this homebrew on 4.01 M33-2 firmware : PMPVLC009_OE_Rev4-test-binaries

Here is my pmp.ini :
# Net Io Config
[net]
con = 1;
vlc_server = 192.159.170.4;
vlc_port = 8080;

pmp_server = 192.159.170.4;
pmp_port = 3333;

debug = 0;

videopath1 = c:\Movies\;
videopath2 = z:\;
videopath3 = ;
videopath4 = ;
videopath5 = ;

musicpath1 = c:\Music\;
musicpath2 = ;
musicpath3 = ;
musicpath4 = ;
musicpath5 = ;

dvd_drive = e:



# VLC transcoding settings
[transcode]
# set res_horiz = 480 if you use AVC
res_horiz = 480;
res_vert = 272;

# use_avc_hw is heavily experimental !!
# if set to 1 then automatically vid_codec = h264, aud_codec = mp3, and container = ts are set
# your pmp.ini settings are then superseded
use_avc_hw = 1;

vid_codec = h264;
#vid_codec = mp1v;
#vid_codec = mp2v;
#vid_codec = mp4v;
#vid_codec = DIV1;
#vid_codec = DIV2;
#vid_codec = h263;
#vid_codec = h264;
#vid_codec = WMV1;
#vid_codec = WMV2;
#vid_codec = mjpg;
#vid_codec = theo;

vid_bitrate = 600;
vid_fps = 18;


#aud_codec = mpga;
#aud_codec = mp2a;
aud_codec = mp3;
#aud_codec = mp4a;
#aud_codec = a52;
#aud_codec = vorb;
#aud_codec = flac;
#aud_codec = spx;
#aud_codec = s16l;
#aud_codec = fl32;

aud_bitrate = 64;
aud_channels = 2;

# resample is experimental and enables audio resampling on VLC server,
# it could offload the psp cpu a bit since if the sampling rate isn't 44100Hz
# PMP VLC will do resampling.
# However I noticed that sometimes playback of .mp4 files didn't work
# properly with resample=1
resample = 1;
aud_samplerate = 44100;

aud_extra =;

#container = ogg;
container = ts;
#container = ps;
#container = mpeg1;
#container = mp4;
#container = mov;
#container = wav;
#container = raw;
#container = asf;
#container = asfh;
#container = mpjpeg;



# live stream server
[live]
liveserver = 192.159.170.4;
liveport = 1234;
And here are my VLC settings :
:sout=#transcode{vcodec=h264,vb=600,width=480,height=272,fps=25,acodec=mp3,ab=64,channels=2}:duplicate{dst=std{access=http,mux=ts,url=192.159.170.4:1234}}
Thank you for your help.
Tetsei
Posts: 1
Joined: Thu Sep 04, 2008 6:42 pm

Post by Tetsei »

Hi, binary: PMPVLC009_OE_Rev4-test-binaries.zip runs well on psp slim with custom firmware 4.01 M33-2 but when i choose Live Stream, the word "Loading" appear in the PSP screen and after about 20 seconds the PSP goes off, can it be of the version of PMPVLC???, is there any other version that can work???
Thanks to all....
User avatar
dennis96411
Posts: 70
Joined: Sun Jul 06, 2008 4:59 am

Post by dennis96411 »

Hey, I have the same problem, thought I did something wrong. Guess not.
My PSP's Firmware:
5.00 M33-6 w/ LEDA 0.2

My PSP's Motherboard:
TA-088

My PSP's Model:
PSP-2001 (Slim)
Neuromancer0525
Posts: 2
Joined: Mon Sep 29, 2008 10:45 am

No video

Post by Neuromancer0525 »

I was delighted to find out pmpvlc was able to work on the slim after almost wasting money on a Sony streaming device. I downloaded it to my psp and it actually loaded it. i followed all the directions after doing this i get the audio stream perfect but in place of the video are the words live stream in red and a visualizer that pulses to the audio. I'll start with my specs I'm running windows media center '05 on an alienware area 51m 7700 :3GHz P4 gig ddr2:1- 100gig hdd,1 120gighdd:4 gigs ddr2 memory:nvidia go6800:2-dual layer 8x dvdr.conexant falcon II tv tuner.
My goal is to stream my explorer 8300 cable box video connected via s-video in to my psp. i get audio crystal clear but no video .I dont know if this helps but when i open vlc and choose my tv tuner when i click advanced options and tuner input type i can only choose between cable and antenna no s-video option could this be why i have no video i dont know i will leave that up to a person who reads this with more knowledge on the subject. any and all help would be appreciated thankyou.
Neuromancer0525
Posts: 2
Joined: Mon Sep 29, 2008 10:45 am

Is this thread dead?

Post by Neuromancer0525 »

Ok 1 week and not 1 reply i can only assume this thread is dead. oh well looks like i may have to shell out for the sony device after all. what a shame i finally got the app to load on my slim and it doesnt work right.
User avatar
ALoGeNo
Posts: 4
Joined: Mon Aug 27, 2007 1:11 pm

Post by ALoGeNo »

Hi all you guys.., only to tell you that i have 0.8 and 0.9 relases runing in my 5.0m33-4 , but im using PSP FAT, with 1.50 kernel patch ^^

i think that the ppl wich have SLIM must try with timemachine to run 1.50 in slim and then try to run pmpvlc 0.X for 1.50 kernel.

I was tryed with pmpvlc 0.9 for 3.XX and run but when it conects to videolan in stream video not work, and the same in video or music, and same with DVD.

With pmpvlc 0.9 for kernel 1.50 aaaaaaall the stuff works like a charm ^^

Regards
User avatar
Wally
Posts: 663
Joined: Mon Sep 26, 2005 11:25 am

Post by Wally »

ALoGeNo wrote:Hi all you guys.., only to tell you that i have 0.8 and 0.9 relases runing in my 5.0m33-4 , but im using PSP FAT, with 1.50 kernel patch ^^

i think that the ppl wich have SLIM must try with timemachine to run 1.50 in slim and then try to run pmpvlc 0.X for 1.50 kernel.

I was tryed with pmpvlc 0.9 for 3.XX and run but when it conects to videolan in stream video not work, and the same in video or music, and same with DVD.

With pmpvlc 0.9 for kernel 1.50 aaaaaaall the stuff works like a charm ^^

Regards
With regards to the 3.XX Kernel, you have to set a HEAP for stuff. Otherwise stuff won't always work as it should.

Wally
Phantom8
Posts: 30
Joined: Fri Jun 17, 2005 10:17 am

Post by Phantom8 »

ALoGeNo wrote:Hi all you guys.., only to tell you that i have 0.8 and 0.9 relases runing in my 5.0m33-4 , but im using PSP FAT, with 1.50 kernel patch ^^

i think that the ppl wich have SLIM must try with timemachine to run 1.50 in slim and then try to run pmpvlc 0.X for 1.50 kernel.

I was tryed with pmpvlc 0.9 for 3.XX and run but when it conects to videolan in stream video not work, and the same in video or music, and same with DVD.

With pmpvlc 0.9 for kernel 1.50 aaaaaaall the stuff works like a charm ^^

Regards
You don't need to use 1.5 kernel. The 0.9 OE release in the 1st post works perfectly with 5.0 kernel of 5.0M33-4 CFW. I can stream TV or video files using VLC.
Post Reply