hello are a new user.
I followed the guidance of megaman to install linux blackrhino on ps2.
http://mitglied.lycos.de/ps2dev/tutoria ... linux.html
I copied the files on usb key.
(vmlinux, vmlinux.devfs, initrd.gz and blackrhino_baseimage-1.0.tar.gz)
when I put the key in ps2 and turn I can not boot from key usb.
what should I do?
my ps2 is a slim with mod chip infinity 1.93 memory card 64mb and hhd usb whit hdd ext box
tnx for help
help new user
You need first a program which can start ELF files. There must be a menu or a special key combination in your mod chip.
I would suggest to start uLaunchELF and then start kloader.elf with it.
There are still some problems with slim PSTwo. Some are discussed here:
http://forums.ps2dev.org/viewtopic.php?t=10156
I would suggest to start uLaunchELF and then start kloader.elf with it.
There are still some problems with slim PSTwo. Some are discussed here:
http://forums.ps2dev.org/viewtopic.php?t=10156
tnx for help.
I downloaded version 1.0 cd blackrhino and it seems that works. run boot properly and it seems that I recognize the doors and discs usb.
Now I have to procure the 'adapter to connect the keyboard port usb and a memory card to complete the boot.
I also found networked DVD version of the same operating system. I have to see if there is any difference.
I have a 'other questions:
Once completed the boot and installed the operating system there is the possibility 'to initiate a graphical user interface?
if one with which command?
I downloaded version 1.0 cd blackrhino and it seems that works. run boot properly and it seems that I recognize the doors and discs usb.
Now I have to procure the 'adapter to connect the keyboard port usb and a memory card to complete the boot.
I also found networked DVD version of the same operating system. I have to see if there is any difference.
I have a 'other questions:
Once completed the boot and installed the operating system there is the possibility 'to initiate a graphical user interface?
if one with which command?
There is a X server available. I don't have installed the X server, so I don't know if the following works:tazmanian wrote: Once completed the boot and installed the operating system there is the possibility 'to initiate a graphical user interface?
if one with which command?
1. Setup Blackrhino as described in Updating Your System http://blackrhino.xrhino.com/main.php?p ... o#updating
2. Select a package like "wdm", so all X server packets are automatically selected.
3. Configure it like here http://playstation2-linux.com/forum/mes ... g_id=32808. I don't know if this already supports TV.
4. Start X server with command:
I believe you will not see a picture on TV and need to switch mode with "CTRL"+"ALT"+"+" or "CTRL"+"ALT"+"-".startx